
Since its introduction,
Alpine MRD M1000 Amplifier Alpine has been making amplifiers for years, so when they announce the introduction of their
most powerful amplifier ever, you know it must be something special. This might be more amplifier
than many subwoofers can handle, but for a big system, you'll need an
amplifier like the Alpine MRD M1000. The Alpine MRD-M1000 is a monaural subwoofer amplifier rated at
1,000 watts into 2 ohms at 14.4 volts (RMS) or 500 watts into one channel at 4 ohms. Because it is
optimized for subwoofer applications, the Class D amplifier uses Alpine's AccuClass-D amplifier design.
This uses digital signal processing to control Alpine's Bass Engine bass boost, parametric EQ, time correction,
and a digital crossover.
The Alpine MRD M1000 24dB/octave crossover is selectable from 30Hz to 200Hz. A variable subsonic filter removes frequencies
below 15Hz to 50Hz. The use of digital technology lets this amplifier run very efficiently while producing a
very clean, powerful signal.
The Alpine MRD M1000 has the controls mounted on the top, for easy adjustment after the unit has been installed.
A digital display gives setup information, and indicates temperature, voltage, and current use. There is also
an optional level control that can be mounted in the dashboard to make it simple (and safe) to make
adjustments on the road.
The Iridium Satellite Series 9505 Portable Phone is their latest rugged, weather-resistant phone that is smaller and lighter
than previous generations of Iridium's Satellite Series Phones.
The Iridium 9500 offers clear voice and data services through Global Satellite technologies.
This rental phone is ideal for those who regularly drift in and out of the reach of cellular service.
The 2005 V12 Digital Mono Amplifiers are uniquely designed and enhanced through Micro Dynamics
Engineering, so they deliver even more dollar per watt power than previous models, with an amazing 80%
efficiency. Exclusive thermal management technology ensures non-stop bass performance where other amps
overheat and shut down. Plus, they're much more compact! If you're serious about power, these are the amps that you want.
The MRD M1000 pumps 1000W of power and it's compatible with the amplifier link unit. Now
you can connect any amplifier link ready head unit to the Alpine MRD M1000. (KCE-511M required)
Specs:
Alpine MRD M1000 Bass Engine
* Crossover Type : 24dB/Octave Slope - Digital
* Low Pass Crossover Frequency (Selectable) : 30Hz - 200Hz (1/12 oct. Steps)
* Subsonic Filter Range : 15Hz - 50Hz (5Hz Steps) or OFF, 24dB/octave Slope
* Subwoofer Phase Control : Normal (0) or Reverse (180)
Alpine MRD M1000 General-Amplifiers
* Frequency Reponse : 10Hz-500Hz (+0, -1dB)
* Heat Sink w/Cover (WxHxD)in : 13" x 2-5/16" x 8-11/16"
* Heat Sink w/Cover (WxHxD)mm : 330mm x 60mm x 220mm
* Input Impedance : 100k ohm
* Input Sensitivity (for rated power) : 0.1V to 8.0V
* Signal to Noise (S/N) : 90dBA (referenced to rated power)
* Speaker Impedance : 4 or 2 ohms (Mono)
* Weight (lbs) : 5.0kg.
Alpine MRD M1000 RMS Power (at 12V,20Hz-200Hz)
* Per channel into 2 ohms : 700W x 1
* Per channel into 4 ohms : 500W x 1
RMS Power (at 14.4V,20Hz-200Hz)
* Per channel into 2 ohms : 1000W x 1 (1% THD)