Revox Cassette Deck : Revox B710

 Revox B710 Tape Recorder The cassette tape machine REVOX B710 sets new standards. Original-faithful admission and refined mixing technology inspire even the professional. For the reliability and longevity the name vouches REVOX. Owing to its technical superiority the REVOX B710 is incomparable and expels their owner as a connoisseur. REVOX B710 fulfills its high requirement in terms of musical truth compromiseless.
Four-engine drive assembly REVOX dedicates special care to the substantial functions of the cassette device. Two directly propelling quartz-synchronized Capstan engines guarantee accurate synchronisation and tape feed without jerking. REVOX B710 Two precision precision engineprecision engines provide for fast rewinding and grant a highest possible measure of volume indulgence. No other equipment seizes your cartridges so gently and surely to a life long. The assembly of the four engines on a twisting-free pressure pouring chassis, on whatever the three separated Sendust and ferrite REVOX B710 clay/tone heads are attached, secures the stability of the drive assembly.
DOLBY B AND DOLBY C INTERCARRIER NOISE SUPPRESSOR REVOX uses the Dolby system and knows therefore no disturbing volume noise. Additionally to the Dolby B the B710 MK II is equipped with Dolby C. REVOX B710 system represents the optimal solution for the intercarrier noise suppressor within the problematic elevator range.
HIGH CONVENIENT OPERATION REVOX B710 arranged the controls clearly and clearly. Left the push buttons controlling of the drive assembly, the digital display for speedometer and clock as well as switch for Dolby B and Dolby C are attached. Right are Stereo Mischschmoeglichkeit, LED controlling chain, microphone entrances and kopfhoerer-Anschluss. Behind the REVOX screen the keys for tape typ choice, timer enterprise as well as starting and stopping inch input lie. This convenient operation gives the necessary clearance to the HiFi lover to leave to its formative conceptions free run. The REVOX B710 is just as long-lived as all components of the high-quality REVOX program. Their conception corresponds already today to the requirements from tomorrow.
Technical data
Drive assembly
4-Motoren-Doppel-Capstan-Laufwerk
DC DC enginecDc engines over YP regulated
2 individually crystal-controlled directpropelling Capstan engines

REVOX B710 Rewinding times approx. 45 s for C60 approx. 65 s for C90

Noise reduction system Dolby B/Dolby C switchable, MPX filters insertable

Distortion factor: with 315 cycles per second; 0 railways
I: better than 0,8%
II: better than 1,5%
IV: better than 1,5%

Frequency response: (measured over volume with -20 railways)
I: 30 Hz-18 kHz + 2-3 railways
II: 30 Hz-20 kHz + 2-3 railways
IV: 30 Hz-20 kHz + 2-3 railways

Weighted REVOX B710 signal-to-noise ratio better than 72 railways
Bias & quenching frequency 105 kHz
Entrances per channel
Sensitivity for 0 railways rejection: MIC (asymmetrically) 0.35 mV/10 kOhm
Over-regulation firmness of all entrances 40 railways (1: 100)
REVOX B710 PHONES:max. 2.45 V, optimally for headphones of 200... 600 ohms short circuit proof, separately adjustably over volume automatic controllers
Weight (mass) 10.4 kg
REVOX B710 Case dimensions (B x H xF) 452 x 151 x 352 mm